Tripp-Lite U442-DOCK14-MS Manual Del Propietário página 4

Installation
Notes:
• This product supports video resolutions up to 4K (3840 x 2160) @
30 Hz. If your display is unable to transmit video from the dock, refer to
the Troubleshooting section of this manual for details.
• The dock is compatible with any Microsoft Surface device with a USB-C
port. The rear clamp is adjustable and can adjust to any compatible
Surface device.
1. Secure the U442-DOCK14-MS unit to the rear of your
Microsoft Surface unit via the flexible securing clamps on
either end of the dock.
2. Connect the dock's USB-C male input connector to the
USB-C port on your Microsoft Surface device.
3. Connect a USB-C peripheral device to the USB-C Data/
PD 3.0 port.
OR
Charge the Surface device by connecting its USB-C PD Charger
to the docking station's USB-C PD Charging port for up to
100W (20V 5A) of charging power.
4. Connect up to two USB peripheral devices such as hard drives,
smartphones and tablets to the USB 3.2 Gen 2 ports.
5. Connect a mouse or keyboard to the USB 2.0 port.
6. Connect to a wired Ethernet network at speeds up to
10/100/1000 Mbps (Gigabit) via the RJ45 port.
7. Transmit 4K video to a connected display via the HDMI port.
4