Transport And Storage; Maintenance; Malfunctions; Technical Specifications - Batavus C1 Manual Del Usuario

pressing RECOVERY.
The measurement takes 60 seconds.
2.
After the measurement is finished, the display
3.
shows the result F1-F6 (F1 = best result). Please
note that your results are in a relation to the
pulse level in the beginning of the measurement,
and that your results are personal and cannot
directly be compared with any other person's
results. In order to improve the reliability
of recovery pulse measurement, always try
to standardize the measurement situation as
accurately as possible; start measuring at the
same heart rate level as precisely as possible.
To switch back to the main display by pressing
4.
RECOVERY.

TRANSPORT AND STORAGE

Please follow these instructions when carrying
and moving the equipment about, because lifting
it incorrectly may strain your back or risk other
accidents:
The device is easy to move by pushing along on the
integrated transport wheels. Tilt the device from
the front and push along the floor on the wheels at
the front support. We recommend that you use a
protective base when transporting the equipment.
To prevent the equipment malfunctioning, store in
a dry place with as little temperature variation as
possible and protected from dust.

MAINTENANCE

The equipment requires very little maintenance.
Check, however, from time-to-time that all screws
and nuts are tight.
•
After exercising, clean the equipment with a soft,
absorbent cloth. Do not use solvents. Sweat may
cause corrosion: we recommend therefore that you
protect all metal surfaces outside the plastic covers
with teflon.
•
Never remove the equipment's protective casing.

MALFUNCTIONS

Despite continuous quality control, defects
NOTE!
and malfunctions caused by individual components
may occur in the equipment. In most cases it's
unnecessary to take the whole device in for repair,
as it's usually sufficient to replace the defective
part. Always give the model, serial number of
your equipment and in case of malfunctions also
conditions of use, nature of malfunction and any
error code.
When you encounter unusual behavior from
8
the device, contact your local Batavus dealer for
service.
If you require spare parts, always give the model,
serial number of your equipment and the spare
part number for the part you need. The spare part
list is at the back of this manual. Use only spare
parts mentioned in the spare part list.

TECHNICAL SPECIFICATIONS

Length.............. ......................................... 98 cm
Width .............. ........................................ 55 cm
Height............. .......................................... 146 cm
Weight............. ......................................... 32 kg
The C1 meets the requirements of the EU's EMC
Directives on electromagnetic compatibility
(89/336/EEC). This product therefore carries the
CE label.
The C1 meets EN precision and safety standards
(EN-957).
Due to our continuous policy of product
development, Batavus reserves the right to change
specifications without notice.
The instructions must be followed carefully
NOTE!
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage
due to negligence of the assembly, adjustment
and maintenance instructions described herein.
Changes or modifications not expressly approved
by Batavus will void the user's authority to operate
the equipment!
We wish you many enjoyable trainings!