Chauvet Professional ROGUE R1 WASH Guía De Referencia Rápida página 3

Rogue™ R1 Wash QRG
Power Linking
AC Plug
Replacing The Fuse
DMX Linking
DMX Connection
Mounting
Product
Mounting
Diagram
All manuals and user guides at all-guides.com
You can link up to 10 Rogue™ R1 Wash products at 120 V, 18 products at 208 V,
or 21 products at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
Connection Wire (U.S.)
AC Live
AC Neutral
AC Ground Green/Yellow
1. Disconnect this product from power.
2. Using a flat head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
The Rogue™ R1 Wash
a 3- or 5-pin DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
The Rogue™ R1 Wash uses a 3- or 5-pin DMX data connection for its DMX
personalities: 14CH, 15CH, 19CH, and 21CH. See the User Manual for
information about connecting and configuring the product for DMX operation.
Before mounting this product, read the
mounting point per
(such as TRUSST® clamps from Chauvet) are capable of supporting the weight
of the product. For our Chauvet line of mounting clamps, go to
www.trusst.com/productcategory/accessories-clamps/.
Overhead Mounting
When using only one mounting clamp, be sure to use a clamp with a captive
bolt to prevent accidental loosening.
Wire (Europe)
Black Brown
White Blue
Green/Yellow
will work with
Safety
product. Make sure
Mounting Clamp
Safety Cable
3
EN
Screw Color
Yellow/Brass
Silver
Green
a DMX controller using
Notes. Use at least one
the mounting clamps
Floor Mounting