Temper BOER icasa KAP-02-WIFI Manual De Instrucciones página 30

Display Interface
Install filter screens
Before using this product, remove all packages of filter screens according
to the following procedures, and put them in the product.
Note
There is a group of filter screens at each side of the product. Each side is
equipped with a pre-filter screen and an air purification filter screen; make
sure to put the air purification filter screen in the product firstly, and then
put the pre-filter screen. Keep the side with a zipper pull toward you.
1. Remove
packaging materials
of the air purification
filter screen.
4. Put the unpacked air
purification
screen back to the
product.
7. Repeat the aforesaid procedures to assemble the air purification filter screen at
the other side of the product.
Pull out the upper
all 2.
part of
panel to remove it
from the product.
5.
Put the pre
filter
screen back to the
inside
product.
3. Press down the 2
the side attaching clamps, pull
the
toward you.
6. Reinstall the side panel;
filter
-
install
bottom of the product,
of this
and then push the panel
lightly.
pre -filter screen
the panel at