Worx Professional WU281 Manual Original página 8

Operation
1
HOW TO USE THE HOOK (See Fig.B1 B2)
Screw the Hook on the tool with the screw provided in the plastic
bag. The Hook (3) can be hooked on your belt or pocket, etc.
2 INSTALLING OR REMOVING A BIT HOLDER, SOCKET OR
SCREWDRIVER BIT (See Fig. C)
INSTALLING
Pull the Collect Locking Sleeve forward and insert the desired bit
into the sleeve as far as it will go. Then release the collet locking
sleeve to secure the bit.
REMOVING
Pull the collect locking sleeve forward. Take the tool out of the
chuck and release the collect locking sleeve.
3
ON / OFF SWITCH (See Fig. D)
Depress the On/Off switch to start and release it to stop your tool.
The On/Off Switch is fitted with a brake function which stops your
chuck immediately when you quickly release the switch.
It is also a variable speed switch that delivers higher speed and
torque with increased trigger pressure. Speed is controlled by the
amount of switch trigger depression.
Warning: Do not operate for long periods at low speed
because excess heat will be produced internally.
4
SWITCH LOCK
The On/Off Switch (6) can be locked in the OFF position. This helps to reduce
the possibility of accidental starting when not in use. To lock the Switch
trigger, place the Forward/Reverse Rotation Control in the center position.
All manuals and user guides at all-guides.com
5
6
7
8
REVERSIBLE (See Fig. E1,E2)
For drilling and screw driving use forward rotation marked
" " (Rotation Control lever is moved to the left). Only use
reverse rotation marked "
remove or release screws (Note: With chuck pointed away from
you in operation)
Warning: Never change the direction of rotation when
the chuck is rotating, wait until it has stopped!
USING THE LED LIGHT
The LED light allows you to keep a clear view under less
illuminated circumstances. To turn on the LED Light simply press
the On/Off Switch. When you release the On/Off Switch, the Light
will be off.
The LED Light is also a battery capacity indicator. It will flash when
battery power gets low.
DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or dispose of
the Battery Pack (5) properly. This Battery Pack contains
Lithium batteries. Consult your local waste authority for
information regarding available recycling and/or disposal options.
Discharge your Battery Pack by operating your tool, then remove
the battery pack from the tool housing and cover the battery pack
connections with heavy-duty adhesive tape to prevent short circuit
and energy discharge. Do not attempt to open or remove any of the
components.
" (lever is moved to the right) to