Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16

Enlaces rápidos

Information Update
This document provides updated information regarding the Dell
Storage Enclosure.
Loss of Communication Between the Dell PERC 5/E Adapter
and the Dell PowerVault MD1000 Storage Enclosure
The following activities may cause loss of communication to occur:
Installing or replacing an enclosure management module (EMM) while the server is online
Downloading PowerVault MD1000 firmware
Accidentally disconnecting the cables to the enclosure or EMM while the server is online
Powering down the PowerVault MD 1000 enclosure while the server is online
NOTE:
In a split-mode configuration, these conditions apply to the server that is directly attached to the
affected EMM. In a daisy-chain configuration, these conditions apply when communication is lost to any
enclosure in the daisy chain.
Loss of Communication Messages
When a loss of communication scenario occurs, the following messages could be reported by the
PERC 5/E Adapter Ctrl-R utility and the Dell OpenManage
logged as a result of a loss of communication and they do not indicate actual hardware
component failures.
The PERC 5/E Adapter Ctrl-R utility may report:
Physical disks and virtual disks as Offline, Degraded, Failed, or Foreign
The Dell OpenManage Server Administrator Storage Management may report:
Lost Communication alert(s) to the Dell OpenManage Server Administrator Alert Log
The enclosure, physical disks, and virtual disks as Offline, Degraded, Failed, or Foreign
Resolving a Loss of Communication Scenario
Perform the following steps when a loss of communication scenario occurs:
1 Power down the server.
2 Verify that all the cables are properly connected and secured to the Dell PERC 5/E Adapter
and the Dell PowerVault MD1000 enclosures.
All manuals and user guides at all-guides.com
PowerVault
MD1000
applications. These messages are
April 2006
Tabla de contenido
loading

Resumen de contenidos para Dell PowerValut MD1000

  • Página 16: Actualización De Información

    El software de administración de almacenamiento Dell OpenManage Server Administrator puede notificar lo siguiente: – Alertas de pérdida de comunicación en el registro de alertas de Dell OpenManage Server Administrator – Estado desconectado, degradado, de error o externo del alojamiento, los discos físicos...
  • Página 17: Resolución De Una Situación De Pérdida De Comunicación

    Realice los siguientes pasos cuando se produzca una situación de pérdida de comunicación: 1 Apague el servidor. 2 Verifique que todos los cables estén bien conectados y sujetos al adaptador Dell PERC 5/E y a los alojamientos Dell PowerVault MD1000.
  • Página 18 Otras marcas y otros nombres comerciales pueden utilizarse en este documento para hacer referencia a las entidades que los poseen o a sus productos. Dell Inc. renuncia a cualquier interés sobre la propiedad de marcas y nombres comerciales que no sean los suyos.

Tabla de contenido