Before Starting Work; Preparing The Blower For Operation; Charging The Blower; Charging - Stihl BGA 45 Manual De Instrucciones

9 Before Starting Work

￭ Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation, chemical burns or respiratory illness from
inhalation.
￭ Do not use a blower that is damaged or modified. A
damaged or modified blower or integrated battery may
exhibit unpredictable behavior resulting in fire, explosion
and risk of injury or property damage.
￭ Do not expose the blower or its integrated battery to fire or
excessive temperature. Exposure to fire or temperature
above 212 °F (100 °C) may cause fire and explosion.
￭ Follow all charging instructions and do not charge the
integrated battery outside of the ambient temperature
range specified. Charging improperly or outside the
specified range may damage the battery and increase the
risk of fire.
￭ Have servicing performed by a qualified repair person
using only authorized replacement parts. This will help
maintain the safety and performance of the product.
￭ Do not modify or attempt to repair the blower or the
integrated battery. Follow the instructions for use and
care.
9 Before Starting Work
9.1

Preparing the Blower for Operation

Before starting work:
► Fully charge the blower, @ 10.
► Mount the blower tube and nozzle, @ 12.1.
► Check the controls for proper function and condition,
@ 15.
0458-719-8621-A

10 Charging the Blower

10.1 Charging

WARNING
Read and follow the blower and charger safety precautions
and instructions in this manual, @ 5.5 and @ 6. Be alert for
signs that the integrated battery may be damaged. To
reduce the risk of fire and explosion, never use or charge a
blower with a housing that is cracked, deformed, excessively
hot, leaking battery fluid or otherwise damaged, @ 5.6.
WARNING
Since the blower and charger heat up during the charging
process, do not charge the blower on a combustible surface
or in a location where combustible gases, liquids, vapors,
dusts or other combustible materials or substances are
present, @ 6.
To charge the blower:
► Remove the activation key, @ 13.2.
1
2
3
4
► Insert the charger plug into a properly installed wall
outlet (1) with the same voltage and electrical frequency
stated on the charger's rating plate (2).
English
6
5
15