Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONNECTION
-
Before connecting the subwoofer to the power supply, make sure that the controls are at their minimum
and the POWER switch is off.
-
Connect a line level signal from an external audio source (MP3 player, CD player, mixer, computer, etc.)
to the subwoofer INPUT. Use the XLR connector or the 6.3 mm jack connector.
-
Thanks to the line level output it is possible to position an active loudspeaker for mid-trebles in cascade
with the autoamplified subwoofer. Connect the subwoofer OUTPUT to the input of the loudspeakers.
-
Connect the device to the 230/115 V AC power supply.
-
Switch on the amplified subwoofer using the POWER switch.
-
The value of the frequency of the low pass filter can be varied using the knob located on the rear panel
of the subwoofer.
-
When the device is not being used, switch it off using the POWER switch and disconnect it from the
mains.
- 3 -
EN
Tabla de contenido
