FONESTAR FPRO-SUB35015A Manual De Usuario página 2

EN
DESCRIPTION
The FPRO series loudspeakers are suitable for installations and live PA due to their installation possibilities
and their design characteristics. The wide range of loudspeakers with different powers, components and
acoustic characteristics offer the possibility to select the one which best suits each application. High
performance features to be taken advantage of.
- Autoamplified subwoofer in reinforced wood.
- Textured paint finish.
- Protective front metal grille.
- Carrying handles.
- Hole in the top for 35 mm tube.
CONTROLS AND FUNCTIONS
REAR PANEL
1.- OUTPUT: XLR balanced line level signal output connector to connect several devices in cascade.
2.- INPUT: XLR connectors and 6.3 mm balanced line signal level input.
3.- PHASE: phase inversion selector. Inverts the subwoofer signal phase 180º.
4.- FREQUENCY: control knob which allows the cut-off frequency value of the low pass filter to be selected.
5.- PROT: LED protection indicator. It lights up when the subwoofer protection is activated due to
temperature, surge or overcurrent. With the protection activated, the audio output is cut off.
6.- SIGNAL LIMIT: LED signal peak indicator. It lights up when an input signal is detected with a level that
is too high in the subwoofer input channel or when there is an excessive output level that could cause
damage.
7.- POWER: subwoofer LED power indicator.
8.- MASTER: subwoofer output signal general volume control.
9.- Socket to connect AC power supply cable.
10.- Power supply voltage selector.
11.- POWER: device on/off switch.
- 2 -