Installation And Use - Steren LAM-020 Manual De Instrucciones

1.- Plug the lamp's power cord into an AC household outlet.
2.- The charge LED lights on.
3.- Place the On / Off switch to ON, then press Test button, the lamp must
turn on and the Battery LED will light on.
Antes de utilizar su nuevo Kit C
In case that the lamp won't light on, pull the On / Off cord out.
4.- After 5 minutes, unplug the lamp from the outlet, simulating an
electrical fail. The lamp turns on automatically. The Battery LED indicator
will light on.
6.- If you want to turn the lamp off, use the on / off cord or the on / off
switch.
Antes de utilizar su nuevo Kit C
If you want to use the on / off cord you must place the on / off switch
in ON position.
If you want to turn the lamp on automatically when the electrical
current fails, plug the emergency lamp into an AC household outlet
permanently.

INSTALLATION AND USE

ENGLISH-04