Ddr Dimm Modules: Ddr1-3 - Biostar P4TDH Manual Del Usuario

All manuals and user guides at all-guides.com

DDR DIMM Modules: DDR1-3

DRAM Access Time: 2.5V Unregister (Non-ECC) DDR 200/266 MHz
Type required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB DIMM Module (184 pin)
Due to the limitation of chipset, this board only can support up to 2 banks
of DDR memory.
However, in the market, there are so many single-sided modules
occuping half bank. BIOSTAR would like to utilize the modules as many
as possible. So we divide one bank into 2 sockets. That means the bank
just can support one double-sided or two single-sided modules only.
DDR1
DDR2
Bank 1
DDR3
Does not support Double-sided * 16 DDR Dimms
The Bank 1, contain 2 DDR sockets, one blue & one white.
※ If you have one DDR module and you are not sure if it is a
single or double- sided DDR module, please insert in DDR1
(blue color) socket first.
※ If you have two DDR modules and you are not sure if they are
single or double-sided DDR modules, please insert in DDR1
and 2 (blue color) Sockets.
※ DDR 3, white color sockets, only support single-sided DDR
module.
※ Supports up to two double-sided*8 on DDR1/2.
For better compatibility, before insert DDR modules into the
sockets, we strongly suggest to use the same type of modules
including the model, speed and size of memory.
4