Troubleshooting; Technical Data - Cramer A48T10E-CR Manual Del Usuario

EN
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
7

TROUBLESHOOTING

Problem Possible Cause
The ma- No electrical con-
chine does tact between the
not start machine and the
when you battery pack.
push the
trigger.
The battery pack is
depleted.
The lock-out but-
ton and trigger are
not pushed at the
same time.
Edger stops Depth is set too
during use. low.
Walking too fast.
8

TECHNICAL DATA

Cutting head
Blade length
Weight
Solution
1. Remove battery pack.
2. Check contact and in-
stall the battery pack
again.
Charge the battery pack.
1. Pull the lock-out but-
ton and hold it.
2. Pull the trigger to start
the machine.
Adjust the depth as
shown in the instrustion
manual.
Do not force the edger
through the grass.
Blade
225mm
1.9 kg
English
6