Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Airfusion Whitehaven Installation Instructions
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting
bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F) provided
with the outlet box and washers (E) provided with fan. Fig. 8
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned on
the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. Fig.9
INSTALLATION OF Lamp (Fig. 10)
• Install the globe to the lamp holder then secure it by turning clockwise.
Do not exceed the maximum power rating. (For fan with light only) Fig. 10
Complete the electrical wiring according to the 'ELECTRICAL WIRING DIAGRAM' section below. (Fig.11)
⚫
Noted: The Peregrine fan is a DC technology fan and cannot be used with an AC wall switch. If use wall
switch, on/off toggle wall switch – only, Always leave in the "on" position and use remote.
5 | P a g e
HANGING THE FAN
Fig. 8
Fig. 10
Fig. 9
Tabla de contenido
