Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Airfusion Whitehaven Installation Instructions
3. Install a new 3V CR2032 DC battery in the compartment. Please make sure the polarity of the battery is
correct. (Fig. 15c)
Please make sure the polarity of
the battery is correct.
4. Install the battery compartment cover back onto the remote and secure by re-tightening the screw.
PAIRING REMOTE & RECEIVER – WHEN 1 DC CEILING FAN IS INSTALLED IN ONE LOCATION
NOTE: Ensure that you have installed a single pole disconnection switch in the fixed wiring for the fan.
NOTE: Ensure power to the receiver is ON prior to pairing the remote with the receiver.
•
Turn OFF the mains supply to the fan by on/off wall switch.
5. Install the battery into the remote. Please make sure the polarity of the battery is correct. (Fig. 15c)
•
Turn ON the power to the receiver.
•
Press and hold the "
ON to the receiver of the ceiling fan.
If the fan has light kit attached, the light will flash on and off to indicate the paring process is activated.
•
Turn ON the fan and change the speed of the ceiling fan via the remote to check the operation and
successful paring.
•
If pairing has been unsuccessful, repeat these set of steps again.
Note: The fan supports control by up to 2 transmitter. To reset the fan to only can be controlled by one
transmitter, do the pairing process twice, but press and hold the "
seconds.
PAIRING REMOTE & RECEIVER – WHEN 2 OR MORE DC CEILING FANS ARE INSTALLED IN ONE
LOCATION
When two or more fans are located near each other, you may want to have the remote/receiver for each fan
set to a different code, so that the operation of one fan does not affect the operation of the other fan/s.
NOTE: Ensure that you have installed a single pole disconnection switch in the fixed wiring for each fan.
NOTE: Ensure power to the receiver is ON prior to pairing the remote with the receiver.
9 | P a g e
" button on the remote for 3-5 seconds within 30 seconds of switching the power
" button of transmitter more than 10
Fig. 15c
Tabla de contenido
