Tools You Will Need; Mounting Space - Samsung ME11A7510 Serie Manual De Instalación

TOOLS YOU WILL NEED

11 /
10 ˝
16
#1 and #2 Phillips Pencil
screwdriver
Tin snips (for cutting Scissors (to cut
damper, if required) template, if
necessary)
Gloves Saw (saber, hole or
keyhole)
Level Duct and masking
tape
Install_ME11A7510DS_AA_DE68-04709A-00_EN+MES.indb 7 Install_ME11A7510DS_AA_DE68-04709A-00_EN+MES.indb 7
Ruler or tape Carpenter square
measure and (optional)
straight edge
Electric drill with Filler blocks or
/ ˝, / ˝ and / ˝ scrap wood pieces,
3 1 5
16 2 8
drill bits if needed for top
cabinet spacing
(used on recessed
bottom cabinet
installations only)
Stud finder or Safety goggles
Hammer (optional)

MOUNTING SPACE

12˝ max.
/
11
10 ˝
16
1 /
30˝
24
5
5˝
NOTE
• The space between the cabinets must be 30˝ wide and free of obstructions.
• This microwave oven is for installation over ranges up to 36˝ wide.
• If you are going to vent your microwave oven to the outside, see the Hood
Exhaust Section for exhaust duct preparation.
• If installing the microwave oven beneath smooth flat cabinets, be careful to
follow the instructions on the top cabinet template for power cord clearance.
• Maximum cabinet depth above and beside the unit is 12˝.
• The dimensions provided are the minimum required for mounting the
microwave oven. Local codes and the practical use of the range will likely
require you to provide more than the 13.5˝ shown between the range and the
bottom of the microwave.
Bottom edge of the cabinet
/ ˝
needs to be 24
1
or more
5
from the cooking surface.
˝
Backsplash
English 7
2021-06-16 2021-06-16 10:55:28 10:55:28