Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Warnings
•
Do not use the device if its connecting cable or any other component part is
defective.
•
Do not replace detachable mains supply cords by inadequately rated cords.
•
Do not keep the device switched on needlessly when it is not in use.
•
Do not use this Onbone heating device to reheat splints that have already
been moulded. Instead, use the Onbone Express A002 heating device to
reheat splints and orthoses that have already been moulded.
Cleaning
Unplug the device prior to cleaning. Wipe the device with a damp cloth. To
clean the device use a general purpose detergent, soap or diluted ethanol
(70 vol-%). Do not use abrasive cleaners. Remove any residues gently with a
microfibre cloth or damp cloth. Take care not to scratch the cabinet surfaces.
If necessary, you can also clean the device with more conventional antiseptic
wipes.
Troubleshooting
Unplug the device and contact your sales person. Do not attempt to repair the
device yourself!
Warranty, Service and Disposal
The device has a 1 year warranty. Please contact the retailer in the event of any
warranty issues. The device can be disposed as electrical waste in accordance
with local regulations.
Technical Specifications
Power Supply 230 V AC, 50 Hz
Output power 1300 W
Weight approximately 10 kg
User interface: 2 temperature adjustment buttons (+ and -), 9 LED temperature
indicators.
Operating conditions: indoors, temperature range 5-40 °C, and at maximum
of 2000 m from sea level, and maximum relative humidity 80 % (31 ˚C) – 50%
(40˚C). Non-condensing.
Power connection: Safety grounded IEC power supply connector (C14). Internal
protection: Replaceable 8 AT (slow blow) glass tube fuse, in both phase and
neutral conductors. Programmatic resetting overheating protection (90 °C).
Non-resettable thermal protection (128 °C). Safety class I. Enclosure class IP 21.
The product conforms to the following standards:
EN 61010-1 and IEC 61010-2-010.
Tabla de contenido
