Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. Insert two batteries into the lower battery recess of the back-box and set the RF module switch to the ON
position.
4. Pull the cable through the chassis and tighten the screws. Tighten the screws in this order:
a. Middle
b. Top left
c. Bottom left
d. Top right
e. Bottom right
Caution: Tighten the screws completely by torque of 1.0 - 1.5 N·m. Not doing so may cause malfunction of the wall
tamper.
5. Insert the lower part of the main unit and push down to fix it onto the chassis.
Tabla de contenido
