Cameo OTOS H5 Manual De Usuario página 21

Settings
Lamp State
Default
Mode
Display Reverse
Backlight
Dimmer Curve
Off
Switching off the lamp  ATTENTION! Switch-
ing off the lamp shortly after switching on
is prevented by a delay circuit to protect the
lamp (approx. 1 minute)! Do not disconnect
the device from the power supply before the
switch-off process is complete!
On Switching on the lamp
On Lamp switched on after restart
Off Lamp switched off after restart
Last Status before switching off is restored after restart
Standard (480 W) Maximum brightness
Eco mode (380 Reduced maximum brightness in the event of
W) reduced fan speed
Off No display rotation
On Rotate display by 180°
On Display lighting permanently on
Off after 60 Deactivation of display illumination after
seconds approx. 1 minute without input
Linear Light intensity increases linearly with DMX value
Exponential Light intensity can be finely adjusted at lower DMX
values and broadly adjusted at higher DMX values
Logarithmic Light intensity can be broadly adjusted at lower
DMX values and finely adjusted at higher DMX
values
S-curve Light intensity can be finely adjusted at lower
and higher DMX values and broadly adjusted at
medium DMX values
21