INFOSEC UPS SYSTEM Zenergy Station 2000 Manual Del Usuario página 6

3. Charging
This unit is shipped from the factory with its internal battery fully charged. However, some
charge may be lost during shipping and the battery should be recharged prior to use. Plug
the Zenergy Station into an appropriate power supply, press the power switch to turn on the
Zenergy Station, and allow the product to fully charge by leaving it plugged-in for at least 8-
10 hours with no load (no electrical devices).
4. Connection
Plug the Zenergy Station into a 2-pole, 3-wire grounded receptacle.
Battery backup outlets
Connect your computer, LCD monitor, Home DVD burner, and any externally powered data
storage device into the 2 battery supplied outlets on the top of the Zenergy Station. Make
sure that the connected load does not exceed the power of backup outlets.
Surge protected outlets
You can also connect devices that do not require backup time (e.g. a printer or a speaker
kit) into the 2 surge-protected and filtered outlets of Zenergy Station.
6 INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - [email protected] - 10 04 04 206 13
All manuals and user guides at all-guides.com