Safety Precautions - Athena GET CDI Serie Guia

ENGLISH
A. WARNINGS FOR CORRECT USE
Read all the instructions and warnings carefully before using
GET CDI unit. Failure to read and/or observe the instructions
and warnings can lead to incorrect use of the device or its
malfunction, resulting in product damage and personal injuries.
GET CDI UNIT KIT IS INTENDED ONLY AND EXCLUSIVELY
FOR RACING USE.

SAFETY PRECAUTIONS

1. Follow the instructions described in this manual to prevent
vehicle damages.
2. Do not modify or replace the material supplied by GET.
3. Always make sure that no installed part can interfere with the
hot parts of the engine, the steering components or with the rider.
4. The product is not a toy. Keep it out of the reach of children
and/or animals as it contains small sized components that
could be swallowed.
5. Do not use the product for purposes other than those
specified in these instructions.
6. Do not use high pressure washers on the product.
IMPORTANT INFORMATION
1. Always make sure that GET CDI unit is properly installed and
functional prior to use.
2. Never expose the device to temperatures above 70°C/158°F.
3. Install it when the engine is cold.
4. To change the GET CDI unit map and customize the ignition curve, it is
necessary to use GET Maya programming software (sold separately).
5. If the bike does not start or the engine is irregular, be sure
that the GET CDI unit chosen is compatible with your bike model
and year and verify that the unit is connected properly.
EN
2