Morphy Richards Accents Manual página 6

48952MEE Rev8_MR Instruction Books 13/11/2013 09:10 Page 6
Using whisk attachment
1 Insert the whisk attachment into the whisk gearbox F.
2
Place the whisk gear box and whisk attachment onto the blender
body, by aligning the release button indent on the gearbox until it
has clicked into place G.
• To avoid splashing, start whisk on speed 1 and increase to speed
3 if required. Do not use 'Turbo'.
Top tips
• When blending foods with strong colour (eg. carrots) the plastic
parts of the appliance may become discoloured. Wipe with
cooking oil to clean any discoloured parts.
• For blending and chopping, select a slow speed for soft
ingredients, increase the speed to produce the consistency
required.
• Select a high speed for chopping or blending hard ingredients.
• When using the blending leg, start the process by plunging the
blender into the ingredients. This will ensure all the ingredients are
pulled into the blade to be processed. Continue this movement
until the mixture is to the desired consistency.
• Do not lift the blender head out of the mixture as splashing may
occur.
Chopping bowl capacities
Below, there are a few guidelines. These may vary according to
the quantity and the consistency of the food. Do not process
for more than 1 minute at a time.
Cleaning
Before cleaning and maintenance, switch the appliance off
and unplug it.
WARNING: Handle the blades with care as they are sharp.
1
The whisk gearbox and chopping bowl lid should be wiped over
with a warm soapy cloth. Do not immerse these parts in water.
2 Clean the main housing with a damp cloth and dry all the parts
thoroughly.
WARNING: Never immerse main housing in water or any
other liquid.
Food
Beef
Pork
Hard cheese
Almonds
Hard boiled eggs
Onion
Parsley
Carrots
Dry bread
6
•
•
1
2
3
4
Capacity
400gm
400gm
250gm
300gm
3 eggs
250gm
Large bunch
400gm
2 slices
Trouble shooting
Check the plug is in its socket and the switch is in the 'on'
position.
Is the plug itself or the socket faulty? Check this by plugging in
another appliance.
Appliance gets very hot.
Blender has been used continuously for too long.
Leave the appliance to cool.
Appliance not working.
The removable blender attachment has not been fitted
correctly.
Detach the attachment and replace as described in 'Assembly'.
Wall mounting bracket
The hand blender can be wall mounted for convenient storage
H.
WARNING: Always ensure you are not drilling into the wall
adjacent to any electrical wires or pipes such as water or
gas.
Find a suitable position on the wall or cupboard where the
blender is to be positioned.
Mark the fixing points through the bracket.
If you are fixing to a solid brick or block wall use a suitable size
masonary drill and drill to a depth of 25mm.
If fixing to a wood or cupboard surface, drill a 2mm pilot hole or
use a bradawl.
Preparation
Dice approx 2cm
Dice approx 2cm
Dice approx 1cm
None
Cut into halves
Cut into quarters
Remove stalks
Slice
Cut into quarters
Approx Time
20-30 secs
20-30 secs
30-40 secs
10-20 secs
3-5 secs
3-6 secs
3-5 secs
5-10 secs
10-20 secs