Chopper Attachment Assembly - Beautiful 19105 Manual Del Usuario

Chopper Attachment Assembly (Figure 3)
1. Place the chopper bowl, chop/grind "S" blade, and chopper bowl lid
on a flat, clean work area.
2. Mount the center of the chop/grind "S" blade onto the chopper bowl's
center pin.
3. Add food to be processed into the chopper bowl.
4. Add the chopper bowl lid to the chopper bowl. Make sure the center of
the "S" Blade Connector fits securely over the "S" blade stem.
5. Before assembling the attachment collar on chopper lid, keep the "S"
blade connector vertical.
6. Align the arrow (
UNLOCK (
7. Turn the shaft clockwise until the LOCK (
the arrow (
8. Insert the "S" Blade connector into the attachment collar. Line up
notches for a perfect fit. Press and assemble the collar and lid.
9. Plug the power-supply cord into a 120V AC electrical wall outlet.
IMPORTANT: To avoid over-processing, press and quickly release either
speed button for PULSE action.
10. Press and hold the LOW speed (
When the button is released, chopping will STOP. Increase speed setting
as needed.
11. For a consistently fast speed, press and hold the HIGH speed
( ) button.
12. When the button is released, lift the motor body and attached collar,
and then lift and remove the lid. With the collar in one hand, and the
motor body in the other, turn the arrow (
counter-clockwise until it aligns with the UNLOCK (
separate the collar.
13. Unplug the Hand Blender from the wall outlet when not in use
and before cleaning.
19105, 19106, 19107, 19108, 19128 BTFL Immersion Blender IM r5.indd 17 19105, 19106, 19107, 19108, 19128 BTFL Immersion Blender IM r5.indd 17
) on the motor body with the attachment collar's
) icon.
) and both pieces are locked together.
) icon is directly under
) button to chop at slower speeds.
) on the motor body
17
) icon and
2021-12-13 9:17 AM 2021-12-13 9:17 AM