Whisk Attachment Assembly - Beautiful 19105 Manual Del Usuario

Whisk Attachment Assembly (Figure 2)
1. Place the motor body, attachment collar and whisk on a flat,
clean work area.
2. Insert the stem of the whisk into the attachment collar. Press firmly
until the whisk locks into the collar.
3. Align the arrow (
UNLOCK (
4. Turn the shaft clockwise until the LOCK (
the arrow (
5. Plug the power-supply cord into a 120V AC electrical wall outlet.
IMPORTANT: To avoid splattering and over-processing, begin at LOW speed
( ), then increase speed to HIGH speed (
6. Place food to be processed into the beaker or any tall cooking
or mixing container.
7. Insert the whisk attachment so that it skims the surface of the
ingredients.
8. Press and quickly release either speed button for PULSE action.
9. Press and hold LOW speed (
When the button is released, blending will STOP. Increase speed setting
as needed.
10. For a consistently fast speed, press and hold the HIGH speed (
button. Blend ingredients with a gentle lift and lower motion.
11. When the button is released, the Hand Blender will turn OFF.
12. When processing is complete, and the whisk has completely stopped,
lift the whisk attachment out of the beaker or blending container.
With the collar with whisk in one hand, and the motor body in the other,
turn the arrow (
with the UNLOCK (
pull the whisk out off collar to separate the whisk.
WARNING: To avoid splattering, make sure the whisk has completely
stopped.
13. Unplug the Hand Blender from the wall outlet when not in use
and before cleaning.
19105, 19106, 19107, 19108, 19128 BTFL Immersion Blender IM r5.indd 15 19105, 19106, 19107, 19108, 19128 BTFL Immersion Blender IM r5.indd 15
) on the motor body with the attachment collar's
) icon.
) and both pieces are locked together.
) button to blend at slower speeds.
) on the motor body counter-clockwise until it aligns
) icon and separate the collar with whisk, and then
) icon is directly under
) as needed.
15
)
2021-12-13 9:17 AM 2021-12-13 9:17 AM