Country Code - REFUSOL 004K Instrucciones De Uso

Kopie von DOK-RESOL-BA00-WW-WR0006K_-NN-P.doc
Inverter numbering
Inverters are numbered manually. The number of the inverter is shown to the lower left of the
screen.
Inverter numbering screen
Key
◄►
OK
If NO is selected:
The inverter applies the number shown and moves to the
date setting screen.
If YES is selected:
The display shows the following screen.

4.3 Country code

The country where the inverter is operated is set in the Country code menu. Depending on the
country selected, the country-specific network requirements are automatically set.
Copyright REFU Elektronik GmbH
YES = Assign a user-defined number to the inverter.
NO = Apply the number of the inverter as it is.
Confirm your selection.
Note: This setting can be edited up to 4 hours after it has been made and infeed
into the supply network has started. If infeed has not started yet, this time
period is prolonged. After the time period has elapsed, it is no longer pos-
sible to change this setting.
Function
31