Iluminarc LOGIC AR111 DN M Guía De Referencia Rápida página 6

EN
Hi-Hat Mounting
To mount the LOGIC AR111 DN M in the prepared hi-hat can:
1. Install the hanging pendant bracket on the product (see
2. Place the trim ring accessory on the product from above.
3. Plug in the CAT6 cables routed through the cable pipe of the hi-hat. Take care to plug the in and out cables to
their correct ports.
4. Insert the product so the pendant bracket passes up through the hi-hat bracket and past the stops.
5. Turn the product and lower it so the pendant bracket rests between the stops on the hi-hat bracket.
6. Attach the springs of a trim ring (not shown) to the posts of the trim ring accessory.
Shown outside of hi-hat for
illustrative purposes only
5
QUICK REFERENCE GUIDE
Trim ring accessory
Attach the springs of a trim ring (not shown)
to the posts of the trim ring accessory
Pendant Mounting).
Stops (x4)
LOGIC AR111 DN M QRG Rev. 4