Cleaning And Maintenance - cecotec PUREAROMA 500 SMART SAND Manual De Instrucciones

Only use 100 % natural essential oils. If they contain any chemicals or impurities
it may cause damage to the product.
Place the product on a flat surface and remove the upper lid.
Fig. 5
Connect the adapter to the product's socket.
Fig. 8
Use a measuring cup to pour water or essential oils into the device. Do not use
boiling water and do not try to fill the device while it is operating. Then, add 2-3
drops of essential oil per each 100 ml.
Fig. 7
Use the upper lid to close the unit again. The device must not be operated
without the cover on.
Fig. 8
Connect the power adapter to a power supply.
Buttons description
Power button
The device will buzz twice after being powered on and will start emitting steam.
Long press this button for 1 second to turn the device off.
Intermittent mode works every 10 seconds.
Light button
Press the button once to turn on the product's light. The colour will change from
one to another automatically. There are 7 colours. Press this button 10 times
to switch off this light. Long press this button for 1 second to turn off the LED.
Steam/Timer button
Press it once for a medium level of steam. The device will buzz once.
Press it again for a higher level of steam. The device will buzz again.
Press it one more time to stop emitting steam.
Long press this button to switch to the Timer interface and setting an alarm.
Alarm button
Hold pressed the alarm button until the screen changes and use the left and
right buttons to set the alarm. You can have three alarms on at the same time. In
order to cancel an alarm, hold it pressed and press "Cancel".

4. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply and allow it to cool down
before cleaning.
Use a soft, damp cloth to clean the product's surface.
Do not immerse the appliance in water or other liquid.
Do not use abrasive scouring pads, powders or cleaners.
21
PUREAROMA 500 SMART