Parts; Start Up; Battery Charge - Truper MAX-20L Manual

Battery
charger
NOTE
In model MAX-20LS,
battery and charger are sold
separately.

Battery charge

1. Plug in the charger in a 127 V~power outlet. A green
light of the charge indicator will light.
2. Insert the battery into the charger sliding it as shown in
the figure. The green light will turn off and the red light
should come on, indicating that charging has started.
• When the battery is completely charged, the green light
will be on and the red light will be off.
• Disconnect the charger from the power once the charge
is completed.
• If the red light is blinking it signals a defective battery.
Replace with a new one.
• In case the green light is blinking it signal the
temperature in the battery is lower to 32 °F or higher than
113 °F. Wait until the battery temperature is in the
adequate level to be able to charge it.
6
ENGLISH
Battery
connection
teeth
Rotation and block
direction button
Charge
indicator

Parts

Drive
Switch
Speed
selector
LED
light
Battery
release
button
20V
Belt clip

Start Up

2
Handle
Battery
Battery Level
Indicator
1