Phil&Teds traveller 2021+ Manual Del Usuario página 30

EN
and frame are aligned. • Use the attachment system provided
and do not use any other attachment system. • Co-sleepers
shall never be used in an inclined position. • To prevent a
suffocation hazard from entrapment, the co-sleeper shall
be properly secured to the adult bed using the attachment
system. • There shall never be a gap between the lower side
of the co-sleeper and the mattress of the adult bed. • Check
the tightness of the attachment system before each use by
pulling the co-sleeper in a direction away from the adult bed. •
If there is any gap between the co-sleeper and the adult bed
DO NOT use product. • Gaps should not be filled with pillows,
blankets or other items. • DANGER! – Always completely
raise all sides and ensure all top rails are installed when not
attached to the adult's bed.
AS A COT:
• Be aware of the risk of open fire and other sources of
strong heat, such as electric bar fires, gas fires, etc. in the
near vicinity of the cot. • Do not use the cot if any part is
broken, torn or missing and use only spare parts approved
by the manufacturer. • Do not leave anything in the cot or
place the cot close to another product, which could provide a
foothold or present a danger of suffocation or strangulation,
e.g. strings, blind / curtain cords, etc. • Do not use more
than one mattress in the cot. • Before using the traveller ,
™