Phil&Teds traveller 2021+ Manual Del Usuario página 29

EN
secure and tight fit, as a child could trap parts of the body or
clothing (eg. strings, necklaces, ribbons for babies' dummies
etc) on loose parts, which would pose a risk of strangulation.
• It is recommended that the mattress supplied by the
manufacturer is used. The maximum thickness (25mm) of the
mattress shall be such that the internal height (surface of the
mattress to the upper edge of the bassinet frame) is at least
200mm. The size (700mm x 450mm) of the mattress shall be
such that there is no gap greater than 30mm between the
mattress and the sides and ends of the bassinet. • Only use
the bassinet with all sides raised.
AS A CO-SLEEPER:
• WARNING – To avoid hazards from the child's neck being
caught on the top rail on the side that is next to the adult bed,
the top rail must not be higher than the adult bed mattress.
• WARNING – To avoid the risk of your child being strangled,
the attachment system to the adult's bed shall always be kept
away from and out of the bassinet. • DO NOT use co-sleeper
if any parts are missing, damaged, or broken. Contact
phil&teds for replacement parts and instructional literature
®
if needed. DO NOT substitute parts. • This co-sleeper is
designed for use only with adult beds that are between
47 and 76 cm from floor to top of adult mattress. • The co-
sleeper is only suitable for adult beds where the mattress