Maintenance And Cleaning; Solving Problems - Newlux SecaDry v150 XXL UV Manual Del Usuario

Do not touch or cover the air vent when the device is running.
The air vent on the device and the air vent on the outer cover must be properly
aligned, ensuring that the position is correct before activating the device to avoid

Maintenance and cleaninG

1. Turn off and unplug the device from the electrical current. Wait until
the device becomes cold before starting cleaning.
2. Clean the whole surface and parts with a soft cloth, if necessary
you can lightly dampen it with water and soap. The surface must be
cleaned to avoid discolouration and damage.
3. If you are not going to use the device for a long period of time, keep
it clean in a dry place with no humidity.
Do not submerge the device or its parts in water.
Do not use solvents, bleach or corrosive substances to clean the device.

SOlVinG PROBleMS

PROBLEM
The device will not turn
on.
The drying time is very
long (6h)
The device suddenly
turns off
air escaping and optimising performance.
CAUSE
• The unit is not plugged
in.
• P roblem with the
household electrical
system/blown fuse.
• The clothes are too
bulky.
• The clothes have not
been wrung out.
• The outer cover is not
properly positioned
and air is escaping.
• The air vents are
blocked by clothes or
something else, the
device is automatically
turning off for safety
reasons.
• T he time of 360
minutes has been
exceeded.
SOLUTION
• Check the functioning
using another power
outlet.
• C ontact the Official
Technical Service.
• Reposition the outer
cover.
• If the limit time has
been exceed, turn the
device off for at least
30 minutes before
starting a new cycle.
23 |