Tabla de contenido
SAFETY, OPERATORS, MAINTENANCE & PARTS MANUAL
9
END OF SEASON
a. The units should be thoroughly cleaned down to
remove all accumulations of grass clippings and
debris.
b. Turn the cutting cylinders to clean the cutting
edges.
c. Apply a little oil with a brush to the spiral cutters
to prevent rusting.
d. Slowly turn the cylinders which will then spread
the oil on the bottom blades.
WARNING NOTE: Do not turn the cylinders
manually.
en-18
JACOBSEN FAIRWAY & T-PLEX CUTTING UNITS
JACOBSEN FAIRWAY & T-PLEX CUTTING UNITS
SAFETY, OPERATORS, MAINTENANCE & PARTS MANUAL
10
GUARANTEE
GUARANTEE
We GUARANTEE that should any defect in workmanship or material occur in the
goods within TWO YEARS or two thousand hours (on models equipped with hour
meters), or whichever occurs first.
Exception to this warranty will be Aeration products, which are covered for a period
of TWO-YEARS or five hundred hours (on models equipped with hour meters) or
whichever occurs first.
We will repair, or at our option, replace the defective part without making any charge
for labour or for materials, provided that the claim under this guarantee is made
through an authorised dealer and that the defective part shall, if we so request, be
returned to us or to the dealer.
This guarantee is in addition to, and does not exclude, any condition or warranty
implied by law, except that we accept no liability in respect of used/second-hand
goods, or in respect of defects which in our opinion are in any way or to any extent
attributable to misuse, lack of reasonable care or ordinary wear and tear, or to
the fitting of spares, replacements, or extra components which are not supplied
or approved by us for the purpose. The use of non-recommended oil or lubricant
nullifies the guarantee.
Damage through transport or normal wear does not come under the guarantee.
The warranty is extended to the original purchaser only and is not transferable to
subsequent owners. The warranty period begins on the date the product is delivered
to the end user (customer), unless otherwise agreed with the manufacturer. At the
end of the first year the owner must have the product serviced by an authorised
dealer to be eligible for the second year of warranty coverage.
SALES & SERVICE
A network of authorised Sales and Service dealers has been established and these
details are available from your supplier.
When service attention, or spares, are required for the machine, within or after
the guarantee period your supplier or any authorised dealer should be contacted.
Always quote the registered number of the machine.
If any damage is apparent when delivery is made, report the details at once to the
supplier of the machine.
en -19
Tabla de contenido
