Using The Timer - Denon DRA-201SA Instrucciones De Operación

ENGLISH
9

USING THE TIMER

(1) Setting the Current Time (24-hour display)
Example: Setting the current time to 19:30
BAND MEMORY PRESET / TUNING
ON / STANDBY MODE TIMER / RDS / SET DOWN UP SOURCE DIRECT
PHONES FUNCTION
MHz CH
TUNED STEREO AUTO
1 2 3, 5, 7 4, 6
1
Turn on the power.
Press the TIMER button for at least
3 seconds.
• "TIME" is displayed.
If the time is already set,
2
"EVERYDAY" is displayed.
Press one of the PRESET/TUNING
buttons to display "TIME", then
perform step 3.
Press the MEMORY/SET button.
• The hours position flashes.
3
(2) Before Setting the Timer
Be sure to set the current time. If the current time is not set, the timer standby indicator ("
2
timer will not function.
Be sure to preset the station before setting the timer. (Refer to "Presetting AM and FM stations" on page 14.)
2
The DRA-201SA is equipped with two types of timers: the everyday time which turns the power on and off at the
2
same times every day, and the once timer that turns the power on and off only once.
Do not change the timer standby mode after the timer is activated (after the timer on time is reached). The timer may
2
not operate properly.
It is not possible to set the timer start and end times to the same time.
2
If the display or operation is not normal, unplug the power cord, then plug it back in while pressing the memory/set
2
button (MEMORY/SET). This restores the tuner to the initial default values. After doing this, reset the presettings,
current time and timer settings.
When setting the timer to operate the CD player, MD recorder or cassette deck, do so with a disc or cassette loaded
2
and the disc holder or cassette holder closed. The timer will not operate properly if no disc or cassette is loaded or if
the disc holder or cassette holder is open.
16
All manuals and user guides at all-guides.com
Use the PRESET/TUNING
buttons to input the hours
(19).
• "19" flashes in the hours
4
position.
VOLUME
Press the MEMORY/SET button.
• "19" stops flashing, remaining
lit, and the minutes position
STEREO RECEIVERER DRA-201SA
starts flashing.
5
Use the PRESET/TUNING
buttons to input the
ON / STANDBY
minutes (30).
• "30" flashes in the
6
minutes position.
TIMER
Press the MEMORY/SET button
at the sound of the chime of a
time service, etc.
• "30" stops flashing, remaining
lit, and the current time is
7
displayed.
MEMORY
/ SET
The number changes continuously when one of the
tuning buttons (TUNING UP or DOWN) is pressed.
If the time is already set when step 2, 3 is performed,
both the hours and minutes positions flash.
(3) Setting the Timer
The timer function lets you switch the power between
2
PRESET / TUNING
DOWN UP
the on and standby modes automatically at the desired
times.
When connected in a system with the 201SA series,
2
the timer can be used to play a CD, cassette or MD or
to record from the tuner onto the MD recorder or
cassette deck ("air check").
Example: Using the everyday timer to listen to the
station stored at preset number 3 (FM 98.00 MHz)
from 12:35 to 12:56
MEMORY
/ SET
3, 5, 7, 9,11,13,15,17
BAND MEMORY
ON / STANDBY MODE TIMER / RDS / SET
PHONES FUNCTION
TUNED STEREO
PRESET / TUNING
DOWN UP
1,18 2 4, 6, 8,10,12,14,16
1
Turn on the power.
MEMORY
/ SET
Press the TIMER button for at least
3 seconds.
• "EVERYDAY" is displayed.
2
If the time is not set, "TIME" is displayed.
Perform steps 3 to 7 on page 16, then start
the timer setting over.
Press one of the
PRESET/TUNING buttons
3
to display "EVERYDAY" or
"ONCE".
") will not light and the
Press the MEMORY/SET button.
• This sets the unit to the timer
setting mode's
setting mode.
4
Example: When the everyday timer is
selected
Use the PRESET/TUNING
buttons to switch the
function to "TUNER".
5
The function switches as follows each time
the button is pressed:
VOLUME
PRESET / TUNING
DOWN UP SOURCE DIRECT
MHz CH
AUTO
STEREO RECEIVERER DRA-201SA
Press the MEMORY/SET button.
6
• "TUNER" is stored in the
memory as the timer function.
ON / STANDBY
Use the PRESET/TUNING
buttons to set preset
number 3.
7
TIMER
Press
button.
• The preset station is stored in
the memory and the timer on
PRESET / TUNING
time setting mode is set.
8
DOWN UP
MEMORY
/ SET
<Setting the
PRESET/TUNING on time>
function
Use the tuning buttons to set
the hours position to "12".
9
PRESET / TUNING
DOWN UP
: When the TUNING UP button is pressed.
: When the TUNING DOWN button is
pressed.
MEMORY
/ SET
PRESET / TUNING
DOWN UP
the MEMORY/SET
MEMORY
/ SET
PRESET / TUNING
DOWN UP