Troubleshooting - Ramon Soler 8102 Manual Del Usuario

INSTALATION DRAWINGS
TROUBLE SHOOTING
FAULT CAUSE
Fault low water 1. Debris in the valve
flow 2. Eyet in the valve is jammed
No water 1. No DC supply
2. No AC supply when whing
adapter
3. Water source turned off
REMARKS
1. The tap should be firmly fixed. Any play may cause malfuction.
2. The distance between the sensor eye and the bottom of the basin should be less than 50 cm.
3. One should remove all foreign objects lying in front of the sensor eye after installation. Photogra
phic material should be stored or kept out of the sensor's range, so as not to incur in unwanted tap
operation by accidental discharges.
Attention: Connect RED to RED, and BLACK to BLACK
ACTION
1. Close the water via the triangle valve is
the font inver tube, ther clear debris out
1. Change new batteries
2. Check the power wide box and wait the
supply to return
3. Turn on the water adjustment screw
EN
7