Loop Record; Motion Detection; Capture/Snap Shot; Take Photo - aqprox appHULKCAMPRO Guia Del Usuario

All manuals and user guides at all-guides.com
one meter.
Note: When recording, there is no self capture function.
2) Loop recording
a. Set the record overwrite time say for 2 mins for example (pls refer to menu
setting), the DVR enters loop recording mode, press
recording (you can see "C" icon in the screen), when records to 2 mins
(according to the time you set), DVR will stop recording automatically and
save the video, then continue recording; When SD card is full, DVR will
delete the first video footage automatically and continue recording.
b. During recording, press
time will display on the LCD screen.

3) Motion Detection

Set Motion Detection say for 30 SEC.(can set different time, pls refer to menu
setting), and exits, "REC KEY TO DO MOTION DETECTING" showed in the screen,
press once key to record. If no object is moving, it will stop recording
automatically after 30 SEC., If there is always object moving, it will detect the
object circularly according to the time you set.

4. Capture/Snap Shot

During video recording or playback, press
(Note: When capture the image, the video recording is continuous processing,
you can check the capture images only under browse mode)

5. Take photo

1) Normal shooting

Under camera mode, aim at the object you want to shoot and press
it will save the photo automatically.

2) Self capture

Under camera mode, press
press / key to select "self capture" (time is optional), confirm and exit, press
key, the camera will take and save photos automatically every the times you set.
Notice: Set "self capture" as "NO" to stop self capture and return to normal
shooting.
Memo: Do not move the camera when taking pictures; otherwise it may affect
the photo effect.

6. Zoom in/out

Under standby mode, press
key to stop and save the video, the remaining
key to capture image.
key three times to enter system setting,
/ key to zoom in/out the image.
key to start
key,
27