Vivotek SD8363E Guía De Instalación Rápida página 5

3-2. Connecting Power and I/O Wires
If you need to connect I/O wires and 24V power, disassemble the top section of the
camera. It is highly recommended to complete the following before you can mount
the speed dome camera at the installation site:
Skip this section and move to Section 3-3 if you connect the Ethernet cable only.
3-2-1. Cabling through the Waterproof Connectors
Components of the Waterproof Connector
Screw Nut (A)
Seal (B)
All manuals and user guides at all-guides.com
Connect with the mount bracket
1-3
Cabling through the dome cap and waterproof
1-1
connectors
Plan the wire length and complete cabling to
1-2
the Interface Section
Seals (C)
Housing (D)
Sealing Nut (E)
EN-4
Wire range: 13~16AWG (1.2~1.8mm)
•
A socket wrench for the M20 hex nut is
•
required.