Mounting Diagram - Iluminarc LOGIC GZ L Guía De Referencia Rápida

EN
Filters
The LOGIC GZ L comes with a Very Wide filter which may be installed or uninstalled by removing one of the end caps
and sliding the filter in or out between the outer housing and the LED lenses. This should be done without tools.
The Very Wide filter is flexible, and must be bent in order to be installed.
WARNING: The use of tools in removing or installing the end caps may cause damage to the product.
Mounting
Before mounting this product, read the
supporting the weight of the product.
To mount the LOGIC GZ L in any orientation (up light, down light, or side light):
1. Rotate the integrated mounting brackets so they are not blocked by the body of the product.
2. Secure the brackets to the mounting surface with M5, #10-32, or #12-24 screws or bolts.
3. Angle the body of the product as desired.

Mounting Diagram

1
2
3
QUICK REFERENCE GUIDE
Safety Notes. Make sure the mounting surface and hardware are capable of
3
End cap
2
LOGIC GZ L QRG Rev. 3