FIGURE 9
5. Fold cover forward.
6. Unsnap the retaining strap from the front bow and insert the
male end into the female end of the front retention buckle.
See Figure 10.
FIGURE 10
7. Verify both buckles are attached by pulling on the strap.
WARNING: Damage to personal property and possible injury
may occur, if; vehicle is operated without both retaining straps
fastened securely when cover is in open position, or if the
attachment clamps are not firmly secured to the box lip, or if the
clamps are not properly stowed using the retention feature.
TO REMOVE THE TONNEAU COVER
1. Follow the procedure "To open the tonneau cover".
2. Before rotating the front handles, DISENGAGE THE LOCKING
TABS by pulling them rearward on both front handles. See
Figure 11.
Folding Tonneau Cover
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
AUTH
FIGURE 11
3. Rotate handles inboard release compression.
4. Pull clamp down and rotate assembly to disengage it from
the lip of the truck box.
5. Rotate cover to expose handles.
6. Align the clamp assembly bolt (shaft of the handle) with the
retention feature and rotate handle assembly flat onto the
panel and press firmly to secure. See Figure 9.
7. Remove the tonneau cover from the vehicle.
(Exercise caution when lifting due to the cover's weight.)
SECURITY
CARGO PROTECTION
If extra cargo security is desired and your vehicle does not have
a locking endgate, GM Accessories offers an endgate lock that
matches the key combination of your vehicle.
COVER SECURITY
For additional theft prevention of the tonneau cover, the front
handle is equipped with an eyelet that will accept a ¼" pad lock.
See Figure 12 (pad lock not included).
FIGURE 12
REV )(11
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
Folding Tonneau Cover
PART NO.
20951290
6200 Grand Pointe Dr., Grand Blanc, MI 48439
20951290
SHEET
3
SHEET
3
9
OF
9
OF