MAINTENANCE
1.
Unplug the unit and let it cool completely.
2.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if
necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater.
3.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may
Slide battery cover off
cause damage or deterioration to the surface of the heater.
4.
DO NOT immerse the heater in water.
5. Wait until the unit is completely dry before use.
6. Air filter needs cleaning after used 3 months. Please take down the filter as following steps. Flush
and clean the taken –down filter with water then dry it out and re-assemble.
7. If you do not use the heater for a while, please take out the remote battery (to prevent corrosion)
as shown below. Store remote in a safe place.
The unit
Remove Batteries
1) Remove bracket screws (4X)
2) Remove Air filter
Re-install cover
17