Panel Description; On/Off Switch - Palmer Pemutt Mutterstolz Manual De Usuario

PANEL DESCRIPTION

1
DESTRUCTION
Controls the gain and distortion level of the effect.
2
DIRT
Adjusts the amount of harmonics and sustain.
3
COLOR
Adds warmth and bite without obscuring the guitars inherent tone.
4
MOThER
This sets the output level. Plently of juice is available to over-
drive your tube amp.
5
LED
When lit the pedal is switched on.
6

ON/OFF SwITCh

This determines whether the pedal is active or bypassed.
7
IN
Use a quality instrument cable with 1/4" jacks to plug your guitar
into this jack socket.
8
OUT
Use a quality instrument cable with 1/4" jacks to connect this out-
put to the input of your guitar amplifier, or the next stomp box in
the signal chain.
8