EAS ELECTRIC ECOFFE45 Manual De Instrucciones página 60

Emptying
When this machine is not going to be used for a long
time or has to be transported to another area, we suggest
to use this function:
In "READY" state, press Enter, and press + to scroll the menu
and select "MAINTENANCE". Press Enter to enter next
menu, select "EMPTY READY" and press Enter again. The
machine will display "REMOVE TANK", after removing it press
Enter for the appliance to start the program (the screen
will display "EMPTYING").
Wait for a moment, then the buzzer will run 3 times and the
screen will become black. That means the emptying
program has finished.
Notice: even if the machine has been manually emptied, the
next start will automatically run the "system filling"
program. The screen displays "OPEN TAP": press Enter and
the screen will display "SYSTEM FILLING", the pump will
start working and water might flow from the A3 hole.
Setting water hardness
The descale message is displayed after the appliance
has been operated for a factory set period of time
calculated on the basis of the maximum quantity of lime
scale which may be contained in the water used.
The operating period can be extended if you require making
descaling less frequent by programming the machine on the
basis of the real lime content in the water used. Proceed as
follows:
Use a special water hardness testing strip to check the water
hardness level of your water supply and set the appliance
EMPTYING
24 V.1