Input Selection And Av Connections - Input And Output Sockets For Connected Equipment - Toshiba 32ZP46 Serie Manual Del Propietário

Input selection and AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6
for a clear view of the back connection recommendations.
Most VCRs and decoders send a signal through the SCART
lead to switch the television to the correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown. This
button must be used to view equipment connected using
the COMPONENT VIDEO INPUT (EXT 4).
An S in the display e.g. EXT 3S, indicates the input is set
for an S-Video signal.
Digital Audio on the screen indicates that the external
source has been set as a digital audio input. (ZP48 only)
Input selection
Use the Input Selection if the television does not switch
over automatically.
Press B to select B
1
(EXT 1-5).
To return to television mode press
2
one of the numbered buttons.
Input selection – Digital Audio signal
(ZP48 models only)
This television is provided with 2 digital audio inputs – DA-1
and DA-2 – so that equipment can stay permanently
connected.
For example: connect the video signal from a DVD to the
Component Video Input (EXT 4) and from a games
console to SCART 2 (EXT 2), connect the audio cables to
the inputs on the back of the television. Match the two up
as follows:
If DA-1 (optical) has been connected to the DVD
1
player, select AV connection from the Feature
menu and press Q to highlight Digital input-1,
then press S or R to select EXT 4.
AV connection
Back
Digital input-1
Digital input-2
EXT3 input
EXT3 output
All manuals and user guides at all-guides.com
B
1, 2, 3, 4 or 5
B B B B
again or
B
EXT 4
EXT 2
AV
EXT 1
2 For the second connection, press Q to highlight
Digital input-2 (coaxial), then S or R to select
EXT 2 for the games console.
Input signal selection (ZP46 and ZP48)
This specifies the type of signal going into SCART 3 (EXT3)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
From the Feature menu select AV connection
1
and with S or R select either AV or S-VIDEO as
the required input for EXT 3.
If the colour is missing try the alternative setting. Back
Digital input-1
Digital input-2 EXT3 input
EXT3 output
Output selection – signal for SCART 3
This enables selection of the source to output from
SCART 3. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
SCART 1 and stereo VCR to SCART 3, then select EXT 1
as the EXT3 output. The signal received through SCART
1 will output directly through SCART 3.
Select AV connection.
1
Back
Digital input-1
Digital input-2
EXT3 input
EXT3 output
Use S or R to change the EXT3 output option to:
2
MONITOR = The picture on screen.
TV = The last television programme selection.
EXT 1 = The picture from equipment connected
to SCART 1.
EXT 2 = The picture from equipment connected
to SCART 2.
EXT 5 = The picture from equipment connected
to the front input sockets.
17
EXT 4
EXT 2 AV
EXT 1
EXT 4
EXT 2
AV
EXT 1