Using The Child Seat; Attaching The Backrest; Removing The Backrest - Britax Parkway SG Guia Del Usuario

Using the Child Seat

Before you use the Parkway SG booster seat for the first time,
you will have to complete the assembly steps below.

Attaching the Backrest

IMPORTANT: Keep fingers away from moving
parts to avoid potential injury.
1 Detach the elastic loops of the base cover
and armrest covers from the back of the
booster seat base (Fig. A).
2 Place the base on a flat surface. From the
child's left side of the booster seat, align
the backrest hinge cylinder with the hinge
slot on the base.
3 Push the backrest hinge all the way into
the base hinge slot (Fig. B).
IMPORTANT: DO NOT rotate the backrest
until the cylinder has been completely inserted
into the base hinge slot. Rotating the backrest
before it has been completely inserted may
result in damage to the booster seat.
4 Rotate the backrest up until it doesn't rotate
into the flat position under its own weight
(Fig. C).
5 Attach the elastic loops of the base cover
and armrest covers to the elastic retainers
on the back of the booster seat (Fig. D).
14
All manuals and user guides at all-guides.com

Removing the Backrest

1 Place the booster seat on a flat surface.
2 Detach the seat cover and armrest covers
a
3 Push the backrest down until it lies flat
4 Slide the backrest from the child's left
5 Attach the elastic loops of the base
b
NOTE: Store the backrest in a safe place.
c
d
from the base by unhooking the elastic
loops from the elastic retainers on the
back of the base (Fig. E).
(Fig. F).
side of the base (Fig. G).
cover and armrest covers to the elastic
retainers on the back of the base (Fig. H).
Using the Child Seat
e
f
g
h
15