Hallins 75 IP54 Manual Del Usuario página 103

 Modifications to the lifting trolley that affect operational safety are not permitted.
 Signs and markings must not be removed or made illegible.
 Only handle loads that have been arranged in a stable and safe way. The load must be
carried by the entire load bed rather than just parts of it.
 Only loads that are within the permitted lifting capacity of the lifting trolley may be
handled.
 The lifting device must be adapted to the shape and dimensions of the load.
 Always try to position the load in the centre of the load bed to avoid instability.
Furthermore, avoid having loads that protrude outside the platform, and always ensure
that the load is stable on the trolley, and if required, strapped in place. Allow for the risk
that the load may start to move, or collapse.
 Use safe and adequate lifting devices when moving loads to and from the lifting trolley.
Pay particular attention when handling heavy goods, and goods with dangerous
contents.
 The lifting trolley must undergo preventive maintenance on a regular basis for the
purpose of avoiding accidents.
 Swedish Work Environment Authority provisions must be observed, directive
2009/104/EG.
 It is prohibited for people to be on the platform.
 When the lifting trolley is left unattended, ensure that the wheel brakes are applied, so
as to avoid unintentional movement. The brakes must also be applied if this is required
by the current work task.
 Take care when handling freely suspended loads.
 Do not use the lifting trolley as a jack for vehicle lifting for example.
 The lifting trolley must not come into direct contact with foodstuffs.
 Do not use the lifting trolley in potentially explosive environments.
 When using in public environments, particularly where children can reach the working
area of the machine, the operator must take adequate measures to prevent people from
entering the risk zone, for example, by cordoning off the work area, or by fitting the
machine with a guard. We recommend that a hazard analysis is prepared based on the
Machinery Directive for the relevant working situation.
 A load must not be present on the load carrier for inspections, service and repairs.
 The lifting trolley's drive unit is located beneath protective housing. This may only be
removed by personnel qualified to carry out inspections, service, and repairs.
 Only Hallins original spare parts may be used when replacing parts. Failure to observe
this may nullify the warranty obligation in full.
7