All manuals and user guides at all-guides.com
>> Before using, make sure that the power switch stands next to mini USB port.
>> Aim the remote controller at the camera every time you press a button.
[Note]: The camera will shut down automatically if it is in standby mode without any
operation more than 2 minutes.
3.1. POWER ON/OFF
3.1.1. Power on the camera by pressing Button A for 3 seconds. The camera will
vibrate once. The red and blue indicator lights will illuminate for 3 seconds, then the
red indicator light will stay illuminated, indicating the camera has entered into stand-
by mode.
3.1.2. Power off the camera by pressing Button A for 3 seconds. The red and blue
indicator lights will flash 3 times and turn off.
3.2. VIDEO RECORDING
3.2.1. Power on the camera by pressing Button A for 3 seconds. The camera will
vibrate once. The red and blue indicator lights will illuminate for 3 seconds, then the
red indicator light will stay illuminated, indicating the camera has entered into stand-
by mode.
3.2.2. Hold down Button B for 3 seconds to record video. The camera will vibrate
once. The red indicator light will flash 3 times and turn off.
3.2.3. Press Button B once to stop recording video. The camera will vibrate twice.
The red indicator light will stay illuminated, indicating the camera is back to standby
mode.
[Note]:
1). A video file will be generated and saved every 5 minutes automatically.
2). The camera can record video continuously for 2 hours on a full charge.
3). Video Resolution: 1920×1080P
Video Format: AVI
4). Loop recording is supported.
5). The camera memory could save 50 minutes video in max.
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing Button A for 3 seconds. The camera will
vibrate once. The red and blue indicator lights will illuminate for 3 seconds, then the
red indicator light will stay illuminated, indicating the camera has entered into stand-
by mode.
3.3.2. Press Button C once to take a photo. The camera will vibrate once. The red