Operation - cecotec TOTALPURE 2000 CONNECTED Manual De Instrucciones

ENGLISH

3. OPERATION

Plug the device into a power supply. The device will beep, and all light indicators will turn on.
After 3 seconds, the device will enter standby mode. The power button indicator will blink.
On/off
Press the Power button once, the power light indicator and the speed light indicator will turn
on.
Speed
Press the Speed/Mode button consecutively to select the desired speed: Auto (A), Sleep (S),
Low (1) or High (2).
The device will operate at high speed for 2 seconds and then will switch to low speed.
Auto mode
The device will automatically set the most suitable speed according to the air quality:
When air quality is bad, the device will automatically activate high speed, while the air quality
light indicator turns on red;
When air quality is good, the device will automatically activate low speed, while the air quality
light indicator turns on yellow;
When air quality is optimum, the device will automatically activate Sleep mode, while the air
quality light indicator turns on blue.
Sleep mode
Press the Speed button to enter the Sleep mode. All light indicators will turn off except for the
Sleep icon. Press any button to quit Sleep mode.
Timer
Press the Timer button to select the number of hours the device will operate: 1, 3, 7 or 15. After
the device has operated for the set time, it will turn automatically off.
Filter reset
Once the air purifier is turned on, the Filter reset will start counting down. If the air purifier is
turned off and restarted, it will continue to count down.
The filter is designed to be reset after 2000 hours of use. Once it has been used for this time,
the Filter reset indicator will blink.
Once the filter has been replaced, press Filter reset for 3 seconds, the light indicator will turn
on.
Ioniser
Press the Ioniser button to switch the ionising function on and off. The corresponding light
indicator will light up.
22
TOTALPURE 2000 CONNECTED