Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING! Do not update the firmware unless you are experiencing problems with
your digital audio device. Incorrect or faulty firmware installation will cause the player
to stop functioning.
1. Download the updated firmware at www.memorexelectronics.com.
2. Unzip the file, then double click setup.exe in the Desktop folder to install the
software to your computer.
3. Connect the player to the computer using the supplied USB cable and the
installation screen will appear. (If the installation screen does not appear, unplug
the USB cable and turn off the unit). Connect to the computer again and press and
hold the Power On/Off/Stop button until the installation screen appears.
4. Follow the on-screen instructions to install the driver.
5. When finished, click START and locate the newly installed software "Bubbles" and
select "Firmware Download".
If the unit acts erratically, reset the unit by inserting a thin object (such as a paper clip)
into the recessed RESET button. For the RESET button, see page 5 for the button's
location.
All manuals and user guides at all-guides.com
UPDATING THE FIRMWARE
RESETTING THE UNIT
19
Tabla de contenido
