System Map: Right View - EUROCOM Milano M360 Guia Del Usuario Concisa

Concise User's Guide

System Map: Right View

Figure 7
Right View
1. Microphone-In Jack
2. Headphone-Out
Jack
3. S/PDIF Out Jack
4. Optical Device Bay
5. Emergency Eject
Hole
6. DC-In Jack
Changing DVD Regional Codes
Go to the Control Panel and double-click
System > Hardware (tab), click Device
Manager, then click the + next to DVD/CD-
ROM drives. Double-click on the DVD-ROM
device to bring up the Properties dialogue
box, and select the DVD Region (tab) to
bring up the control panel to allow you to
adjust the regional code.
16 - System Map: Right View
All manuals and user guides at all-guides.com
1 2 3
If you need to manually eject a CD/DVD (e.g. due to an unexpected power
interruption) you may push the end of a straightened paper clip into the
emergency eject hole. Do not use a sharpened pencil or similar object that
may break and become lodged in the hole.
DVD region detection is device dependent, not OS-dependent. You can
select your module's region code 5 times. The fifth selection is permanent.
This cannot be altered even if you change your operating system or you
use the module in another computer.
Don't try to remove a floppy disk/CD while the system is accessing it. This
may cause the system to "crash".
5
4
CD Emergency Eject
DVD Regional Codes
Media Warning
6