Connecting The Control Panel; Using The Control Panel - Dometic TravelPower Instrucciones De Uso

All manuals and user guides at all-guides.com

Connecting the control panel

6 Connecting the control panel
➤ Plug the connecting cable into the connection box on the back of the con-
trol panel.
➤ Plug the connecting cable into the plug connection for the display plug
(fig. 2 1 page 3) on the power box.
I
NOTE
Once the control panel is connected to the power box, the power
box which is switched on moves into standby mode.
In order to switch on the power box again, press the
START/STANDBY button for 4 seconds.
6.1 Circuit diagram for remote mode
➤ Connect the control panel in accordance with the circuit diagram in order
to switch the power box on and off via a remote switch (optional, not in
scope of delivery)
Key for fig. 3, page 3
Item Description
1 PIN 9 (pink)
2 PIN 10 (violet)
7

Using the control panel

I
NOTE
In order to use the control panel, the power box must be switched
on. Refer to the operating manual for the power box and the gen-
erator.
8
Explanation
remote switch
+12 Vg
Control Panel
EN