Uline H-3878 Instrucciones De Montaje
Uline H-3878 Instrucciones De Montaje

Uline H-3878 Instrucciones De Montaje

Torre cubica de panel ranurado
Idiomas disponibles

Idiomas disponibles

H-3878
SLATWALL CUBE
TOWER
TOOLS NEEDED
Phillips Screwdriver
Rubber Mallet (Optional)
Confirmat Screw x 20
Camlock x 12
KICK BASE ASSEMBLY
1.
Install camlock pins into the predrilled holes in kick
base boards using screwdriver. (See Figure 1)
2. Install camlocks into large holes in kick base boards
by tapping them into position with rubber mallet.
(See Figure 2)
NOTE: Ensure the hole in the side of the
camlock always faces outward.
3. Arrange kick base boards to form a square, so that
each corner has camlock pins set into the camlocks
of the adjacent board. (See Figure 3)
4. Connect camlocks and pins by inserting screwdriver
into the top hole of the camlock and turning
clockwise. (See Figure 4)
NOTE: Tilt screwdriver at an angle while twisting
to better lock the camlocks.
PAGE 1 OF 6
1-800-295-5510
uline.com
Camlock Pin x 12
Pan Head Screw x 16
Dowel Pin x 8
Screw Cap x 20
PARTS
Caster x 4
Kick Base Board x 4
ASSEMBLY
Figure 1
Camlock Pin
Figure 2
Camlock
Figure 3
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Cube Top x 1
Spinner Base Top x 1
Cube Panel x 4
Figure 4
0521 IH-3878
Tabla de contenido
loading

Resumen de contenidos para Uline H-3878

  • Página 3: Torre Cúbica De Panel Ranurado

    H-3878 800-295-5510 uline.mx TORRE CÚBICA DE PANEL RANURADO HERRAMIENTAS NECESARIAS Desarmador de Cruz Mazo de Hule (opcional) PARTES 20 Tornillos Confirmat 12 Clavijas de 16 Tornillos de Cabeza 4 Ruedas 1 Parte Superior del Cubo Tuerca Plana 12 Tuercas 8 Taquetes 20 Cubiertas 4 Zócalos...
  • Página 4 2. Para cubrir las cabezas de los tornillos exponga la alineación más fácil de las ruedas. parte adhesiva de las cubiertas decorativas para tornillos y colóquelas cuidadosamente en el centro para cubrirlas. 800-295-5510 PAGE 4 OF 6 0521 IH-3878 uline.mx...

Tabla de contenido