HAMPTON BAY HB-4190 Serie Manual Del Usuario página 2

INSTALLATION
For best performance, mount the fixture about
6 feet (1.8 m) above the ground.
❒ Turn power off at the circuit breaker or
fuse.
1. Remove
two nuts.
3. Tighten screws
finger tight.
5. Attach X-Bar to
junction box
Due to the size and weight of the fixture, you
may find it helpful to have an assistant hold
the fixture in place while connecting the
wires.
2. Remove
X-Bar.
SENSITIVITY
MIN MAX
4. Set sensitivity on
fixture back to the
mid-position.
Junction
Box
WHITE
One Motion Light
BLACK
WHITE
Two Motion Lights
❒ Twist the junction box wires and the fix-
ture wires together as shown below. Se-
cure with wire connectors. If you have a
metal junction box, you may not need the
green "pigtail". If you are unsure about
the grounding method, consult your local
building code.
CAUTION: DO NOT connect the RED wire
unless you want to control other lights
from the motion sensor.
Recommended Grounding Method
Use a green ground "pigtail" (not provided) and
twist one end together with the bare fixture wire
and the box ground wire. Secure with a wire
connector. Secure the other end of the "pigtail"
with the GND screw on the X-bar.
Black to black
2
WIRING
BLACK
BLACK
White to white
595-5770-01